It's at the top of this page.

How to replace the packing

Final update date December 26, 2018

Step 1

Roll the liver of the auxiliary stopcock in the outdoor meter box slowly in the direction of "close" to stop the water. (In case of handle type, please turn in the clock direction. After closing, open the faucet and make sure that the water has stopped. )


Step 2

Open the faucet fully, hang the spanner over the faucet head and turn left.


abalone water intake

Remove the faucet head.


abalone water intake

The top is pinched with a comb or tweezers.


abalone water intake

Remove the nut from the top and replace the packing. Please fasten the nut.


abalone water intake

When you change the packing, return the top to its original position.


abalone water intake

I'll hold the faucet head.


abalone water intake

With the faucet handle slightly open, turn the wrench on the head of the faucet to the right and tighten firmly.


abalone water intake

Finally, defeat the lever of the auxiliary stopcock in the meter box in the direction of "open" and restore it. This will drain the water.


Recently, faucets in each household use a lot of mixed faucets and there are various types for each manufacturer.

For inquiries about water supply, please contact Water Works Bureau Customer Service Center.

Water Works Bureau Customer Service Center

Telephone: 045-847-6262 Fax: 045-848-4281
※Please be careful not to make a mistake.

Inquiries to this page

Water Works Bureau Water Supply Service Department Water Supply Maintenance Division

Telephone: 045-671-30699

Telephone: 045-671-30699

Fax: 045-212-1167

Email address: [email protected]

Return to the previous page

Page ID: 716-110-2772

return to the top